产品分类 更多>>
隔膜阀技术参数：
Technical Data of Diaphragm Valve:
较大工作压力：10bar
Max Pressure:10bar
驱动方式：手动
Operation Type: Manual operation
较大工作温度：150℃
Max Temperature: 150℃
适用介质：EPDM-蒸汽
PTFE-水、酒精、油、燃料、蒸汽、中性气体或液体、有机溶剂、酸碱溶液等
Applicable Media: EPDM-Steam
PTFE- Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and Lye
连接方式：对焊（G/ DIN/ISO）
快装
Connection Joint: Butt-welded Ended（G/ DIN/ISO）
Tri-clamp Ended
特点：
1．弹性密封的开闭件，阀体密封堰槽采用弧形设计结构，确保没有内漏；
1. Elastic sealing/ packing and arc weir seal design of valve body insure without leak;
2．流线型的流道，使得阻力减小；
2. Streamline valve design can decrease the friction and resistance of valve;
3．阀体与盖被中间隔膜隔开，使得隔膜上方的阀盖，阀杆等零件不受介质侵蚀；
3. Valve body and bonnet are separated by diaphragms in order to prevent valve parts, such as bonnets and steam from corrasion;
4．隔膜可更换，维护费用低
4. Diaphragms can be changed in order to low the maintenance cost;
5．目测式位置显示开关状态
5. Seeable device can indicate the on-of state;
6．多种表面抛光技术，无死角，在正常位置下无残留。
6. Advanced polishing process insures be sanitary, without dead angle and residue;
7．结构紧凑，适用与狭小的空间。
7. Compact construction is suitable for valve installation with small space;
8．膜片符合DFA及UPS等机构对药品和食品行业规定的安全标准。
8. Diaphragms satisfy all the sanitary standards and conditions of DFA and UPS.
