名片曝光使用说明

步骤1:创建名片

微信扫描名片二维码,进入虎易名片小程序,使用微信授权登录并创建您的名片。

步骤2:投放名片

创建名片成功后,将投放名片至该产品“同类优质商家”栏目下,即开启名片曝光服务,服务费用为:1虎币/天。(虎币充值比率:1虎币=1.00人民币)

关于曝光服务

名片曝光只限于使用免费模板的企业产品详细页下,因此当企业使用收费模板时,曝光服务将自动失效,并停止扣除服务费。

<

返回首页

产品分类 更多>>

特点:Advantages: 1、可视位置指示:可接限位开关或紧急手动装置。 1. Seeable Location Indicator: Be able to access the limit switches and handwheel 2、容易安装:气控头可以作360°旋转,甚至限位开关也可以360°旋转。可方便地安装一到二个限位开关。 2. Easy to install: Pneumatic actuators and limit switches can be made into rotation in any 360-degree; easy to install one and two limit switches 3、先进的气动控制器:加厚工程塑料外壳,安全。低磨损的活塞结构,容量大而低耗气量。内部元件自润滑,免维护。 3. Advanced pneumatic actuator: using thicken Engineering plastics shell to insure valve safty; low wear and tear by the piston structure; high capacity and low air consumption; internal components is self-lubricating and maintenance-free. 4、容易连接:MAMUR标准连接,嵌入式金属接头。可选更小的控制头。 4. Easy to connect: MAMUR standard connection and inbuilt metal connector are suitable for smaller size actuator 5、长寿命导杆:阀杆契形特氟隆(PTEE)密封,避免脏物导入。自润滑,免维护。阀杆经特别处理以确保固定,并能自动校正位置。 5. Long life steam: valve steam uses wedge-shaped PTFE to avoid the dirty; steam are self-lubricating and maintenance-free; after special processing, stem is ensured to be strong, and also can correct position automatically 6、无水锤作用:流体从阀杆下方流入时,水锤(水冲击力)被吸收。 6. No water hammer: when fluid flows from under the steam, water hammer will be absorbed. 7、先进的阀体机构:流量比普通角座大30%,体积更小,流体流态更优。 7. Advanced valve body design: the flow of this angle seat valve is 30% more than the regular 8、不锈钢316阀体,特氟隆密封,耐高温,耐腐蚀。寿命高达五百万次上,单作用角座阀具有结构简单、造型美观、装拆快捷,开关迅速,操作灵活,流体阻力小,使用安全等优点。 8. 316 stainless steel material and PTFE sealing are resistant to high-temperatur and erosion; the usage times can be more than FIVE MILLION times; Single Acting pneumatic angle seat valve is artistic-shape, easy- disassembly, quick on-of, flexible-operation, small fluid resistance, safe and reliable usage.
产品推荐
“温州市快装式不锈钢气动角座阀”信息由发布人自行提供,其真实性、合法性由发布人负责。交易汇款需谨慎,请注意调查核实。