产品分类 更多>>
刮板机链条A江高镇刮板机链条A 污水处理专用刮板机链条
是一种在封闭的矩形断面壳体内，借助于运动着的链条连续输送散状物料的运输设备，其核心构件就是链条，按其结构形式分为套篙滚子链、模锻链及焊接弯板链。结构由内外链扳、销轴、滚子和衬套组成，有时可以不用衬套内外链扳是用冲压的方式加工而成，标准化程度高，加工简单，成本低．啮合方式是滚子与头轮齿啮合，可减少之间牵擦其优点是转动目由，铰接处压力低，可降低磨损，延长使用寿命，拆换链条时必须成对更换；抗拉强度低适用于输送物科500t/h以下输送机模锻链采用棒料模锻而成，由链杆与销轴组成，链杆通过模锻或辊锻，再进行机加工制成，其链杆分为大头、小头和杆身三部分。它的工艺特点是：在锻压过程中对材科的纤维组织有一定的加强作用：且表面采用低碳台工艺金钢渗碳处理这样，既有较高的表面耐磨性又有优良的综合机械性能，耐磨损、质量轻、强度高、使用寿命长：它在与头轮轮齿啮合和在导轨上运行时是滑动摩擦。
Sometimes it is not possible to use the inner and outer Bushing of the Bushing to be processed by stamping. The degree of standardization is high, the processing is simple, and the cost is low. The meshing method is to engage the roller with the first wheel tooth, which can reduce the traction and rubbing. The advantage is that the purpose of the rotation is low, the pressure at the hinge is low, Can reduce the wear, prolong the service life, the chain must be replaced in pairs; The low tensile strength is suitable for the forging chain of the conveyor under 500t/h of the conveyor family. It is composed of a chain rod and a pin shaft. The chain rod is forged by die forging or roll forging, and then processed by the machine. The chain rod is divided into three parts: large head, small head and rod body. Its process characteristics are: in the forging process, it has a certain strengthening effect on the fiber tissue of the timber family: and the surface adopts a low-carbon platform process for carburizing treatment of gold steel. In this way, both the high surface wear resistance and the excellent comprehensive mechanical performance are both good. Wear resistance, light weight, high strength, long service life: it is sliding friction in meshing with the first wheel teeth and running on the guide rail.
