电子电气防火测试-其他常见测试方法： 

IEC电工标准：

IEC 60695-2-11: Glowing/hot wire based test methods-Glow-wire flammability test method for end-products.

IEC 60695-2-11: 着火危险试验—第2-11部分—基于灼热丝/发热丝的试验方法—最终产品的灼热丝可燃性试验

IEC 60695-2-12 (GB 5169.12) Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials

IEC 60695-2-12 (GB 5169.12) 着火危险试验第2-12部分:基于灼热/发热丝的试验方法材料的灼热丝易燃性试验

IEC 60695-2-13 (GB 5169.13) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignitability test method for meterials

IEC 60695-2-13（GB 5169.13）火灾试验—第2-13部分：发光/热线为基础的测试方法——灼热丝材料可燃性试验方法

IEC 60695-11-10: Fire hazard testing-Part11-10: Test flames – 50W horizontal and vertical flame test methods.

IEC 60695-11-10:评估火险的试验—第11-10:试验火焰—用50W试验火焰进行水平和垂直试验的测试方法 

IEC 60695-11-5：Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance

IEC 60695-11-5：着火危险试验.第2部分:试验方法.第2节:针焰试验 (GB 5169.5)
 

中国标准： 

GB/T 2406.2 塑料 用氧指数法测定燃烧行为 第2部分：室温试验

GB/T 2406.2 Plastics – Determination of burning behaviour by oxygen index – Part2: Ambient-temperature test

GB/T 8924 纤维增强塑料燃烧性能试验方法－氧指数

GB/T 8924 Test method for flammability characteristics of fiber reinforced plastic-Oxygen index method

GB/T 5169.5：电工电子产品着火危险试验 – 第5部分：试验火焰 针焰试验方法 装置、确认试验方法和导则

GB/T 5169.5：Fire hazard testing for electric and electronic products – Part 5: Test flames – Needle test method – Apparatus, confirmatory arrangement and guidance
 

美国标准： 

ASTM D 2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

ASTM D 2863 测量支持塑料类似蜡烛燃烧的最低氧气浓度（氧指数）的试验方法 
 

国际标准： 

ISO 4589-3 Plastics — Determination of burning behaviour by oxygen index – Part 3: Elevated-temperature test

ISO 4589-3塑料—燃烧性能氧指数评定—3部分：高温试验
 

法国标准：

NF X70-100: Firebehaviour tests –Analysis of pyrolysis and combustion gases-Pipe still method

NF X70-100: 燃烧特性试验-对高温分解和燃气的分析—管式蒸镏法

NF X 10-702: Fire test methods-Smoke emission-Test of measurement of specific optical density of smoke by the combustion or the pyrolysis of solid materials

NF X 10-702: 防火测试方法—烟的散发—通过燃烧测量烟的可视度或通过高温分解测量固体材料测量试验
 

英国标准：

BS 2782-0:2011 Method 508A / BS 2782-0:2011: Methods of Testing plastic – Method 508A: Rate of burning, laboratory method

BS 2782: 塑料测试方法 – Method 508A: 燃烧等级，实验室方法 ( Tpa & Tpb )
 

详情请咨询：中科易朔(厦门)防火技术服务有限公司

出自：GT2019.03