• • 产品信息
  • 产品编号： Sus304
  • 执行标准： GB
  • 化学成分：

  • C	Si	Mn	S	P
    0.062	0.85	1.74	0.026	0.031
    Cr	Ni	外径（mm）	壁厚（mm）	长度（mm）
    18.25	8.34	0.12-10.0	0.03-4.0	2.0-2500.0

  • 产品用途：沥水架；传感器；传感器用探针管；微创手术器械零件；医疗仪器部件；医疗微创手术器械;光学仪器零件；金属零件；穿刺针；伸缩件;温度计；仪器仪表;热电偶配件
  • 处理工艺：氩弧焊焊接，精轧，精拉，封口，缩口，斜切，收口
  • 理论重量表（单位：kg/m、mm）： （外径-壁厚）*壁厚*0.02491*长度=重量

不锈钢毛细管材料: SUS301/SUS304;内径4mm-10mm抛光处理。 不锈钢毛细管用途: 自动化仪表信号管、自动化仪表电线保护管；精密光学尺线路、工业传感器、电子设备线路保护管；电器线路的安全防护、热工仪表毛细管的防护及空芯高压光缆的内支撑。 不锈钢毛细管特性: 具有良好的柔软性、耐蚀性、耐高温、耐磨损、抗拉性、防水性并提供优良的电磁屏蔽性能。不锈钢软管能自由地弯曲成各种角度和曲率半径，在各个方向上均有同样的柔软性和耐久性；不锈钢软管节距之间灵活，有较好的伸缩性，无阻塞和僵硬现象；不锈钢穿线软管各节边扣之间具有一定的抗拉力，以防软管的破坏导致软管内部铺设的线路暴露在外，轴向拉力能承受公称内径的6倍以上。

• 不锈钢红酒器针管

• 316L不锈钢精拉管

• 304不锈钢液压管

• 304不锈钢毛细管

• H65高精黄铜管

• T2紫铜毛细管

• Dongsheng Shenzhen metal materials Co., Ltd. was established in August 8, 2003, is located in the Pearl River Delta Economic Development Zone of Shenzhen area, the existing staff of more than 30 people, senior technical staff 6 people. Company may reach 500 tons of monthly output!
  Dongsheng Metal materials and all the well-known steel mills such as: (Shanghai Baosteel, Ningbo Baoxin, Shanxi Taiyuan Iron and steel, JFE, Nippon Steel of Japan) have long-term cooperative relations! Over the years we have been committed to creating a new spirit of Dongsheng to serve our customers, we insist on quality to stabilize customers, to serve to retain customers, quality to develop customers!
  Dongsheng company mainly production: stainless steel bar (BITAUTO cut rods, hexagonal bar, square bar, flat steel, imported bar, ultra fine tuning straight bar)
  Stainless steel wire (spring wire, hard line, screw thread, cord, rope, flat wire, line, imported wire, nickel wire)
  Stainless steel pipe (capillary tube, pipe, finishing rolling, knurling pipe, sanitary pipe Lahua)
  Stainless steel tape (tensile belt, belt, pull ribbon, mirror, sandblasting with abrasive belt, belt leveling)
  Stainless steel plate (punching plate, mirror panel, drawing board, matte board)
  The main materials are: Sus201202301301EH, 304304F, 303303Cu, 303F, 316630631310S
  Austenite: Sus410420430420420J2416440
  Iron material: 12L14, 12L15, 82B, 65MN
  Dongsheng Machinable non conventional materials such as: knurling processing, garland machining, cutting angle and processing; rolling belt, sheet to do cutting processing; superfine bar processing, diameter can be do 0.08-6.0MM straightening rods; dimensional tolerances and length can be cut.
  Dongsheng Metal Products Co., Ltd. has excellent mechanical equipment, sophisticated pilots tune and precision quality testing instruments! The stability of each batch of material security, products can be according to GB, Hg, SH, ASTM / ASME, JIS, DIN and other standards organizations production; the blank from Baoxin, Taiyuan Iron and steel, imported parts and long established special steel, raw material quality and reliable. Company strictly according to ISO9000 quality system of production, the company has foreign import direct reading spectrometer, eddy current testing, ultrasonic flaw detection, water pressure testing machine, universal tensile testing machine first imported testing equipment, and supporting the physicochemical analysis facilities, from raw materials to production process to check and inspection methods are strict and effective control.
  Products are widely used in chemical, petroleum, chemical fiber, paper, natural gas, nuclear power plant, boiler heat exchanger, shipbuilding. Food machinery, pharmaceutical, water supply, environmental protection, construction, aerospace and other fields.
  Company of good governance, accumulate, determined to develop become the most health, the most advanced, most competitive metal materials manufacturers, focusing on creating a hundred years of brand, we Bingzhe