ANDEROL ?3057M SYNTHETIC COMPRESSOR OIL, ISO 46/68 For more information please refer to the relevant Material Safety Data Sheet accompanying each product. ?ANDEROL is a reg. trademark of ANDEROL COMPANY. This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best of OUR knowledge or obtained from sources believed by ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only chemists or chemically qualified lab technicians should carry out tests. Before using any chemical, read its label and Material Safety Data Sheet. GENERAL INFORMATION ANDEROL 3057M is a PAO-based compressor lubricant that was designed to provide long-term lubrication of both rotary-vane and oil-flooded screw compressors. TYPICAL PROPERTIES: PROPERTY TEST METHOD TYPICAL RESULTS ISO Viscosity Grade Viscosity @ 40°C, cSt Viscosity @ 100°C, cSt Viscosity @ -25°C, cSt Viscosity Index Density @ 15°C, kg/l Pour Point, °C Flash Point, COC, °C Total Acid Number, mg KOH/g Humidity, % Evaporation, 22 hrs @ 210 °F, % Demulsibility @ 54 °C, ml oil/water/emulsion (min) Copper Strip Corrosion 8 hrs @ 100 °C Four-Ball Wear, 1200 rpm, 75 °C, 40 kg, 1 hr, mm Foaming Tendency, Sequence I, II, III Specific Gravity @15.6°C ASTM D-2422 ASTM - 445 ASTM - 445 ASTM D-445 ASTM D-2270 DIN 51.757 ASTM D-97 ASTM D-92 ASTM D-664 ASTM D-1744 ASTM D-972 ASTM D-1401 ASTM D-130 ASTM D-4172 ASTM D-892 ASTM D -1298 46/68 55.3 8.13 3672 116 0.864 -66 260 0.05 0.02 <1 40/38/2 (15) 1a 0.6 Nil 0.8 5 ANDEROL 3057M APPLICATIONS ???Recommended for use in compressors such as: ???Oil flooded rotary screw compressors ???Oil flooded rotary vane compressors ???Reciprocating compressors Nominal operating range for Anderol 3057M is -40°F to 400°F (-40°C to 205°C). APPROVALS Tested and approved by Knorr-Bremse AG (Knorr Brake Corporation). Should you have any questions regarding the suitability of ANDEROL 3057M compressor lubricant for a specific manufacturer's model compressor, please check with your ANDEROL lubricant supplier or contact Anderol Company. ADVANTAGES ???Fewer oil changes for reduced maintenance ???Compatible with compressor seals, gaskets, hoses, and air system components ???Resistance to oxidation with reduced compressor varnish and deposits ???Greatly reduces fire and explosion hazard ???Longer service life and greater protection of compressor components ???Lower oil consumption COMPATIBILITY ANDEROL synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses. No special precautions related to compatibility are required when 安润龙3057M空压机油